Print numeric data only, List – Ohaus TP Series Electronic Balance User Manual
Page 99
46
Print Numeric Data Only
Print Numeric Data Only
Print Numeric Data Only
Print Numeric Data Only
Print Numeric Data Only
This submenu is used to select numeric
data only, or full display data for RS232
output. Set this feature ON to output nu-
meric display data only, or OFF to output
full display data as follows:
1.
Access the Nu submenu to display
the current status.
2.
Press
to change the status.
3.
Press
to accept the displayed
status.
When
is released, NU will be dis-
played again and the Print menu will be
returned.
List
List
List
List
List
This submenu can be used to output a
listing of current menu settings via the
RS232 interface. When selected, menu
settings for both the Setup and Print menus
will be output. To obtain a listing of current
settings, press
when LIST is dis-
played.
End
End
End
End
End
You must use End to exit the Print menu.
Changes you make in the Print menu
Changes you make in the Print menu
Changes you make in the Print menu
Changes you make in the Print menu
Changes you make in the Print menu
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
End
End
End
End
End
To exit the Print menu and store your
selections, press
when END is dis-
played. The balance will be returned to
normal weighing operations.
MODE
MODE
MODE
MODE
MODE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE