Ohaus TP Series Electronic Balance - Manual (Page 98)

45
10. Set all digits in the same manner. If an
error is made, press to backup
to the desired digit and change it.
11. After the last digit is entered, NON-PL
will be displayed again. Press
to proceed to NON-PH, the high limit.
12. Press to view the current value
for the high end of the range.
13. Change the number as needed using
the same procedure as in step 8.
14. After the last digit is entered, NON-
PH will be displayed again. Press
to display End.
15. Press when END is displayed
to return to the Print menu.
Print Stable Data Only Print Stable Data Only Print Stable Data Only Print Stable Data Only Print Stable Data Only
When enabled, this feature permits only
stable display data to be output. To set the
feature ON or OFF:
1. Access the Stable submenu to dis-
play the current status.
2. Press to change the status.
Press to accept the displayed
status. When is released,
STABLE will be displayed again and
the Print menu will be returned.
PRINT PRINT PRINT PRINT PRINT
MODE MODE MODE MODE MODE
ON ON ON ON ON
TARE TARE TARE TARE TARE
MODE MODE MODE MODE MODE
ON ON ON ON ON
TARE TARE TARE TARE TARE
MODE MODE MODE MODE MODE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE