Ohaus TP Series Electronic Balance - Manual (Page 86)

33
Parts Counting Error Level Parts Counting Error Level Parts Counting Error Level Parts Counting Error Level Parts Counting Error Level
The parts counting error level is the level
of accuracy you consider acceptable for
parts counting results. The adjacent table
lists error levels that you can choose from.
EXAMPLE: With 5 Pct selected, 100 parts
on the pan may yield a displayed count
from 95 to 105 parts.
To view, change or disable the PC Error
Level:
1. Access the Pc Err submenu to dis-
play the current setting.
2. Press to change the setting.
Press to accept the displayed
setting.
When is released, PC ERR will be
displayed again and the Setup menu will
be returned.
MODE MODE MODE MODE MODE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ERROR LEVELS ERROR LEVELS ERROR LEVELS ERROR LEVELS ERROR LEVELS
OFF OFF OFF OFF OFF Disables error level limits. Disables error level limits. Disables error level limits. Disables error level limits. Disables error level limits.
.1 % ±0.1% acceptable error.
.25 % ±0.25% acceptable error.
.5 % ±0.5% acceptable error.
1 % ±1.0% acceptable error.
2.5 % ±2.5% acceptable error.
5 % ±5.0% acceptable error.