Ohaus TP Series Electronic Balance User Manual

Page 88

To view the weight or gross number of

parts on the pan, press

Weight is displayed in the weighing unit
selected in PC ALT in the Setup menu.

IF NET

IF NET has been selected for the alternate
display, you may repeatedly tare the bal-
ance as needed. The alternate display will
show the net weight of parts added since
the last tare.

IF TOTAL

IF TOTAL has been selected for the alter-
nate display, total weight or quantity of
parts on the pan (relative to weight of
container already tared) will be displayed.
Taring will not affect the alternate display.

NOTES:

1. The primary parts count dis-

play always shows the NET
number of parts.

2. Average piece weight is not

affected by taring.

To view the average piece weight press

and hold

To switch between alternate display and

parts count display, press

You may change the alternate display unit
through the Setup menu without losing
the current average piece weight. To exit
or restart parts counting, press and hold

until PC CON is displayed, then

release it. Return to step 2 to restart, or

press

to change to another operat-

ing mode.

Lights to indicate TOTAL
or Gross.

Lights to indicate NET.

Alternate Display

Average Piece Weight

MODE

PRINT

MODE

TARE

MODE