Ohaus TP Series Electronic Balance - Manual (Page 74)

21
Linearity Calibration Linearity Calibration Linearity Calibration Linearity Calibration Linearity Calibration
1. Turn Balance on. After zero reading,
press and hold until CAL is
displayed, then release. Balance will
display SPAN.
2. Press and the display will
show LIN.
3. Press to start the Linearity
Calibration Procedure. When the
is released, C 0g will be
displayed, indicating that no weight
should be in the pan.
4. Press . The display will show
-C- followed by the value of the weight
which must be placed on the pan.
5. Place the required weight on the pan.
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
MODE MODE MODE MODE MODE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE