Ohaus TP Series Electronic Balance - Manual (Page 76)

23
USER MENU USER MENU USER MENU USER MENU USER MENU
The User menu is used to adapt the balance to environmental conditions. It contains
submenus which enable you to reset the balance to factory default settings or to select
specific range settings. Access to the User menu can be disabled using the Lock Out
switch. The following table shows the sequence in which submenus appear on the
User menu.
USER MENU TABLE USER MENU TABLE USER MENU TABLE USER MENU TABLE USER MENU TABLE
Sets all submenus below to original
factory default settings. Reset does not
appear if menu has been locked out.
Specifies the averaging level.
Specifies the desired stability range.
Sets Auto-Zero threshold.
Used to exit the Setup menu and store
your selections.
User Menu Protection User Menu Protection User Menu Protection User Menu Protection User Menu Protection
The User menu may be locked out to
prevent unauthorized personnel from
changing the settings. To lock out the
User menu, refer to the section titled Menu
Lock-Out Protection.
NOTE NOTE NOTE NOTE NOTE: If -SAFE- is displayed, the User
menu has been locked out. Settings may
be viewed but not changed. See the Menu
Lock-Out Protection section to enable it
for making changes.
To access the User menu, press and hold
until USER is displayed, then re-
lease it.
ON ON ON ON ON
TARE TARE TARE TARE TARE