Ohaus TP Series Electronic Balance - Manual (Page 102)

49
RS232 Commands RS232 Commands RS232 Commands RS232 Commands RS232 Commands
All communication is accomplished using
standard ASCII format. Only the charac-
ters shown in the following table are ac-
knowledged by the balance. Any other
commands, control characters or spaces
are ignored. Commands sent to the bal-
ance must be terminated with a carriage
return (CR) or carriage return-line line
feed (CRLF). For example, a tare com-
mand should appear as shown in the
adjacent diagram. Data output by the bal-
ance is always terminated with a carriage
return - line feed (CRLF).
TARE COMMAND TARE COMMAND TARE COMMAND TARE COMMAND TARE COMMAND
Field: T CR LF
Length: 1 1 1