Ohaus TP Series Electronic Balance - Manual (Page 58)

5
INTRODUCTION
This manual covers installation, operation and troubleshooting for the Ohaus Preci-
sion Plus balances, Models TP200, TP400, TP400D, TP600, TP2K, TP4K and
TP4KD. To insure proper operation of the balance, please read this manual
completely.
DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION DESCRIPTION
The Ohaus Precision Plus series balances are precision weighing instruments,
designed to provide years of service with virtually no maintenance. The Precision Plus
series is constructed using a die-cast aluminum base finished with a durable epoxy
powder paint which is resistant to commonly used acids, contains a one piece solid-
state precision electronics PC board, a seven digit LCD display which is 0.6 inches in
height. All Precision Plus series balances are factory set to measure in grams. Each
balance operates through a series of menus which enable precise calibration and
linearity along with various other parameters which enhances operation. A built in lock
switch prevents preset settings from being changed. To prevent measurements from
being affected by air currents, a Draft Shield is mounted to the balance and is available
for ModelsTP200 and TP400D. Power is supplied through an AC adapter which is
available in five voltages for world-wide usage. Accessories include: an RS232
interface kit which allows printing of results through an external computer, an RS232
Interface cable with a print switch, weigh below hook, security device and calibration
weights.
PRECISION Plus Balance