Ohaus TP Series Electronic Balance - Manual (Page 92)

39
PRINT MENU PRINT MENU PRINT MENU PRINT MENU PRINT MENU
The Print menu is used to configure the RS232 interface parameters and customize
the balance’s print functions for your requirements. The following table shows the
sequence in which submenus appear on the Print menu.
PRINT MENU TABLE PRINT MENU TABLE PRINT MENU TABLE PRINT MENU TABLE PRINT MENU TABLE
Sets all submenus below to original factory
default settings.
Specifies baud rate.
Specifies number of data bits.
Specifies parity type, if any.
Specifies number of stop bits.
Enables/disables Auto print feature.
Specifies time interval for automatic output
of displayed data, and/or a range of dis-
played weight values that cannot be output.
Enables/disables printing stable-data-only
feature.
Specifies numeric-only or full display data
for output.
Enables printing a listing of current Print
menu settings.
Used to exit the Print menu and store your
selections.
* Does not appear in menu if menu is locked out.
* * Only appears in Print menu if AUTO P is enabled.
**
*
Print Menu Protection Print Menu Protection Print Menu Protection Print Menu Protection Print Menu Protection
The Print menu may be locked out to
prevent unauthorized personnel from
changing settings.
To access the Print menu press and hold
until PRINT is displayed, then re-
lease it.
ON ON ON ON ON
TARE TARE TARE TARE TARE