Ohaus TP Series Electronic Balance User Manual

Page 70

IF NET

IF NET has been selected for the alternate
display, you may repeatedly tare the bal-
ance between weighings. The alternate
display will show the net weight of mate-
rial added since the last tare.

IF TOTAL

IF TOTAL has been selected for the alter-
nate display, the balance will display the
gross weight (relative to weight of con-
tainer already tared) or percentage of
material on the pan. Taring will not affect
the alternate display.

NOTE:

NOTE: The primary percentage display
always shows the NET percentage.

To switch between the alternate display

and the percentage display, repeatedly

press

NOTE:

NOTE: You may change the alternate
display unit through the Setup menu with-
out losing the current reference.

To exit or restart percent weighing, press

and hold

until PCT CON is dis-

played, then release it. Return to step 2 to

restart, or press

to change to anoth-

er weighing mode.

Lights to indicate NET.

Lights to indicate TOTAL
or Gross.

Alternate Display

Percent Display

MODE