Ohaus TP Series Electronic Balance - Manual (Page 91)

38
List List List List List
This submenu can be used to output a
listing of current menu settings via the
RS232 interface. When selected, menu
settings for the User, Setup and Print
menus will be output. To use this feature,
your balance must be connected to a
computer or printer.
To obtain a listing of current settings,
simply press when LIST is dis-
played in the Setup menu.
End End End End End
You must use End to exit the Setup menu.
Changes you make in the Setup menu
Changes you make in the Setup menu Changes you make in the Setup menu Changes you make in the Setup menu Changes you make in the Setup menu
are only stored in memory if you use
are only stored in memory if you use are only stored in memory if you use are only stored in memory if you use are only stored in memory if you use
End.
End. End. End. End.
To exit the Setup menu and store your
settings, press when END is dis-
played.
When is released, the balance will
be returned to normal weighing opera-
tions.
5. To lock out the other menus, press
and repeat the procedure in
steps 3 and 4.
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
ON ON ON ON ON
TARE TARE TARE TARE TARE
MODE MODE MODE MODE MODE