Averaging level – Ohaus TP Series Electronic Balance User Manual

Page 78

Averaging Level

Averaging level compensates for vibra-
tion or excessive air currents. During op-
eration, the balance continually takes
weight readings from the weighing cell.
Successive readings are then digitally pro-
cessed to achieve a stabilized display.
Use this submenu to specify how much
processing you need to obtain stable re-
sults.

NOTE: Averaging level does not affect
balance accuracy.

Select one of four averaging levels using
the adjacent table as a guide.

To view or change the averaging level:

Access the AL submenu to display
the current setting.

Press

to change the setting.

Press

to accept the displayed

setting.

When

is released, AL will be dis-

played again and the Setup menu will be

returned.

AVERAGING LEVEL

AL 0 reduced stability, fastest

stabilization time

AL 1 normal stability, normal

1 normal stability, normal

1 normal stability, normal
stabilization time

stabilization time

AL 2 more stability, slow stabi-

lization time

AL 3 maximum stability, slow-

est stabilization time

MODE

TARE