List, Auto range models (tp400d and tp4kd), Checking calibration – Ohaus TP Series Electronic Balance User Manual
Page 64: Selecting a weighing unit
11
List
List
List
List
List
This submenu can be used to output a
listing of current menu settings via the
RS232 interface. When selected, menu
settings for the User, Setup and Print
menus will be output. To use this feature,
your balance must be connected to a
computer or printer.
To obtain a listing of current settings,
simply press
when LIST is dis-
played in the Setup menu.
End
End
End
End
End
You must use End to exit the Setup menu.
Changes you make in the Setup menu
Changes you make in the Setup menu
Changes you make in the Setup menu
Changes you make in the Setup menu
Changes you make in the Setup menu
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
are only stored in memory if you use
End.
End.
End.
End.
End.
To exit the Setup menu and store your
settings, press
when END is dis-
played.
When
is released, the balance will
be returned to normal weighing opera-
tions.
5.
To lock out the other menus, press
and repeat the procedure in
steps 3 and 4.
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
MODE
MODE
MODE
MODE
MODE