Ohaus TP Series Electronic Balance User Manual
Page 97
44
2.
If Inter was selected in the Auto Print
submenu, INTER will be displayed
and you may continue with step 3. If
it was not selected, NON-PL will be
displayed. Proceed to step 7.
3.
To enter a time interval for automatic
data output, press
when
INTER is displayed. The current in-
terval (in seconds) will be displayed.
4.
Press
to increase or
to
decrease the number.
5.
When the desired number is dis-
played, press
to accept it.
6.
Press
once to proceed to step
7, or three times to display END and
proceed to step 15.
7.
To enter a range of non printing val-
ues, press
when NON-PL is
displayed. The current value for the
low end of the range will be displayed
with the first digit flashing.
8.
To change the number, start with the
first digit (flashing). Repeatedly press
to change the value to any
number from -9 to +9. A minus sign
will light to indicate a negative value.
9.
When the desired value is displayed,
press
to accept it and the next
digit will begin flashing.
To exclude data
To exclude data
To exclude data
To exclude data
To exclude data
WITHIN SELECTED RANGE:
WITHIN SELECTED RANGE:
WITHIN SELECTED RANGE:
WITHIN SELECTED RANGE:
WITHIN SELECTED RANGE:
SET non-PL < non-PH
Example:non-PL=7g, non-PH=11g
Values <7 OR
OR
OR
OR
OR >11 will be output.
To exclude data
To exclude data
To exclude data
To exclude data
To exclude data
OUTSIDE SELECTED RANGE:
OUTSIDE SELECTED RANGE:
OUTSIDE SELECTED RANGE:
OUTSIDE SELECTED RANGE:
OUTSIDE SELECTED RANGE:
Set non-PL > non-PH
Example:non-PL=11g, non-PH=7g
Values >7 AND
AND
AND
AND
AND <11 will be output.
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
MODE
MODE
MODE
MODE
MODE
FLASHING
Set time interval from
1 to 256 seconds.
MODE
MODE
MODE
MODE
MODE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE
MODE
MODE
MODE
MODE
MODE
ON
ON
ON
ON
ON
TARE
TARE
TARE
TARE
TARE