Ohaus TP Series Electronic Balance - Manual (Page 62)

9
AC ADAPTER
RECEPTACLE
PAN
SUPPORT
If the weigh below hook will be used, it
may be installed in the bottom of the
balance. Simply screw the hook into
the threaded hole in the pan support
which is visible through the access
hole in the bottom of the balance.
AC Adapter AC Adapter AC Adapter AC Adapter AC Adapter
Weigh Below Hook Weigh Below Hook Weigh Below Hook Weigh Below Hook Weigh Below Hook
Round Pan Round Pan Round Pan Round Pan Round Pan
Insert the pan support into the hole in the
weighing mechanism.
Place the pan on the support.
Plug the molded connector of the adapter
into the receptacle at the rear of the bal-
ance (see diagram). Plug the adapter into
a convenient AC outlet. When power is
applied to the balance, it will begin a self
test cycle. During this time, the display will
count down from 10 and display the word
CHEC.