Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 58)

Ranger RP
58
Technical data and accessories
7.1.2 General data
RP..S, RP..M
Applications
• Weighing
• Dynamic weighing
• Counting with fixed or variable reference quantity
• Counting with reference and bulk scale
• Accumulating
• Numerical definition of tare weights, average piece weights and reference quan-
tities
• 100 memory locations for tare weights, average piece weights, target weights
and target quantities
• Checkweighing and weighing-in to target weight/target quantity
Settings • Resolution selectable
• Weighing unit selectable: g, kg, oz, lb, t
• Taring function: manual, automatic, chain tare
• Automatic zero point correction when the scale is switched on and during oper-
ation
• Filter for adapting to the ambient conditions (vibration adapter)
• Filter for adapting to the weighing type, e.g. dispensing (weighing process
adapter)
• Switch-off function, sleep mode for mains-operated devices, energy-saving
mode for battery operation
• Display lighting
• Add mode for determining the piece weight when counting
• Reference optimization
• Programmable memories and identifications
• Date and time
• Signal tone
• Graphic display of the weighing range
Accuracy class OIML/NTEP • RP..S
• RP..M
III
II
Display • LCD (liquid crystal display), digits 16 mm high, with back lighting
Keypad • Pressure point membrane keypad
• Scratch-proof labeling
Housing • Diecast aluminum housing; chromium nickel steel weighing pan
• Dimensions, see Page 59
Protection Class (IEC 529,
DIN 40050, EN60529) • IP43 (not with Ethernet interface)