Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 28)

Ranger RP
28
Counting
3.10.2 Counting with a bulk scale
Prerequisite
The connected second scale is configured as bulk scale.
1. Place the reference parts on the first scale and press
Sample 10 or Sample Size.
The scale determines the average piece weight and changes to the display in
pieces (PCS).
2. Place the parts to be counted on the bulk scale.
The total quantity is displayed.
Note • If tOtAL-Ct -> bULK is set in the menu, only the number of pieces on the bulk
scale is displayed on the bulk scale.
• If tOtAL-Ct -> bOtH is set in the menu, the reference quantity is added to the
bulk quantity.
3.10.3 Counting with an auxiliary scale
Note This configuration allows counting of diverse parts, for example very small parts on
one scale and large parts on the other scale.
Prerequisite
The connected second scale is configured as an auxiliary scale. The scale doesn’t
change automatically but only after pressing the
Scale Select key.
1. Activate the appropriate scale.
2. Place the reference parts on this scale and press
Sample 10 or Sample Size.
The scale determines the average piece weight and changes to the display in
pieces (PCS).
3. Place the parts to be counted on the same scale.
The number of pieces is displayed.