Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 40)

Ranger RP
40
Settings in the menu
4.4.5 INFO-KEY – assignment of the Info key
4.4.6 AVERAGE – determining the average weight for an unstable load
4.4.7 RESET – resetting application settings to factory settings
INFO1 Up to 13 additional values can be displayed via the key Info .
NOt.USEd • Info space not occupied
PCS NEt • Displays net weight in counting
GrOSS • Displays gross weight
tArE • Displays tare weight
APW • Displays average piece weight
HIGHrES • Shows display with a higher resolution
ACCUrCY • Displays counting accuracy
n • Displays number of totalised items
G tOtAL • Displays gross sum
N tOtAL • Displays net sum
PCS.tOtL • Displays sum of pieces
tArGEt • Displays target value and tolerances
dAtE • Displays date
timE • Displays time
INFO2 ... INFO13 As per INFO1
OFF Calculating average weight switched off
AUtO Calculating average weight with automatic start of the weighing cycle
MAnuAL Calculating average weight with manual start of the weighing cycle via PRINT
SUrE? Confirmation inquiry
• Reset the application settings to factory settings with Yes
• Do not reset the application settings with No