9 min.weig - minimum weight – Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en User Manual
Page 36

Ranger RP
36
Settings in the menu
4.3.8
FACT – automatic temperature-dependent adjustment
This menu item appears only on scales with an internal calibration weight.
4.3.9
MIN.WEIG – minimum weight
This menu item appears only if the service technician has saved a minimum weight.
PrOCESS
Adaptation to the weighing process
UNIVEr
•
Universal setting for all weighing samples and normal weighing goods
dOSING
•
Dispensing liquid or powdery weighing samples
StAbILI
Adjusting the weighing speed
FASt
•
The scale operates very fast.
StAndrd
•
The scale operates at medium speed.
PrECISE
•
The scale operates with the greatest possible reproducibility.
The slower the scale works, the greater the reproducibility of the weighing results.
TEMP
Defining the temperature difference for automatic calibration
OFF
•
Switching off automatic calibration in the case of a temperature difference
1K/2K/3K/5K
•
Automatic calibration in the case of a temperature change of 1 K, 2 K, 3 K or 5 K
since the last adjustment
dAY.tim
Defining up to 7 days of the week and up to 3 times for automatic adjustment.
dAY
•
Select day of the week for the adjustment.
7 zeros appear in the display after pressing the key
Yes
. The first zero stands for
Monday, the second for Tuesday, the third for Wednesday etc.
Use the key
No
to go to the desired
day of the week and enter 1.
The display 0100100 means that Tuesday and Friday are selected as calibration
days.
Press
Yes
.
tiME1 appears in the display.
tiME1...3
•
Enter the time(s) for the calibration (hours, minutes).
Note
The format for entering the time (EU or US) depends on the settings in the menu item
TERMINAL-> Device, see section 4.5.1.
ON/OFF
Switching minimum weight function on/off
If the weight on the scale falls below the stored minimum weight, an * appears on
the display in front of the weight indicator.