Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 29)

Settings in the menu Ranger RP
29
4 Settings in the menu
Settings can be changed and functions can be activated in the menu. This enables
adaptation to individual weighing requirements.
The menu consists of 6 main blocks containing various submenus on several levels.
4.1 Operating the menu
4.1.1 Calling up the menu and entering the password
The menu differentiates between 2 operating levels: Operator and Supervisor. The
Supervisor level can be protected by a password. When the device is delivered, both
levels are accessible without a password.
Operator menu 1. Press MENU and keep it pressed until COdE appears.
2. Press MENU again.
The menu item tErMINL appears. Only the submenu dEVICE is accessible.
Supervisor menu 1. Press MENU and keep it pressed until COdE appears.
2. Enter the password and confirm with Yes.
The first menu item SCALE appears.
Note No supervisor password has been defined when the device is first delivered. Therefore
respond to the password inquiry with
MENU when you call up the menu for the first time.
If a password has still not been entered after a few seconds, the scale returns to weigh-
ing mode.
Emergency password for Supervisor access to the menu
If a password has been issued for Supervisor access to the menu and you have for-
gotten it, you can still enter the menu:
Press ZERO 3 times and confirm with Yes.