Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 34)

Ranger RP
34
Settings in the menu
4.3 Scale settings (SCALE)
4.3.1 SCALE1/SCALE2 – Selecting scale
This menu item only appears if an analog second scale or a weighing platform is con-
nected.
4.3.2 CAL – calibration (adjustment)
This menu item is not available for certified scales without internal calibration weight.
dIAGNOS tESt SC intErN/ExtErN 46
KboArd
dISPLAY
SNr
SNr2
LiSt
LiSt2
LiSt.M
WOrK.tim timE SHOW.tIM
WEIGH SHOW.WGH
rESEt.AL SUrE?
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Page
Internal For scales with an internal calibration weight:
1. Unload scale.
2. Activate menu item CAL with
Yes . The scale calibrates with the internal calibra-
tion weight. -Int CAL- appears in the display. After calibration is completed,
-donE- appears briefly in the display, and the scale automatically returns to
weighing mode.
External For scales without an internal calibration weight:
1. Unload scale.
2. Activate menu item CAL with
Yes . The scale determines the zero point.
–0- appears in the display. The calibration weight to be placed on the scale then
flashes in the display.
3. If necessary, change the weight value displayed with No .
4. Place the calibration weight on the scale and confirm with Yes .
The scale calibrates with the calibration weight loaded. After calibration is com-
pleted, -donE- appears briefly in the display, and the scale automatically returns
to weighing mode.