Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 18)

Ranger RP
18
Operation
2.8 Working with identifications
Weighing series can be assigned 2 identification numbers ID1 and ID2 with up to
40 characters that are also printed out on the protocols.
If for example a customer number and an article number are assigned, it can be
clearly seen on the protocol which article was weighed for which customer.
2.8.1 Entering identification
1. Enter identification and press
ID.
IdENt 1 appears in the display.
2. If the entered identification is to be saved as ID1, press Yes . If the entered identi-
fication is to be saved as ID2, first press No , and then press Yes .
The scale returns to weighing mode.
2.8.2 Displaying identification
Displaying ID1: Briefly press ID once.
The number currently assigned to the ID1 appears in the display. If no ID1 was
assigned, no Id appears.
Displaying ID2: Briefly press
ID twice.
The number currently assigned to the ID2 appears in the display. If no ID2 was
assigned, no Id appears.
2.8.3 Clearing identifications
1. Briefly press
ID once to display ID1 or briefly press ID twice to display ID2.
2. Press C for as long as the identification is displayed.
The clearing is briefly confirmed with the message CLEArEd.
2.9 Printing results
If a printer or computer is connected to the scale, the weighing results can be printed
out or sent to a computer.
Press PRINT.
The display contents are printed out and transferred to the computer. See
Section 8.4 for sample protocols.