Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 19)

Operation Ranger RP
19
2.10 Displaying info
Up to 13 different values to be displayed can be configured in the menu for the key
Info.
Depending on the configuration in the menu, see Section 4.4.5, the following values
can be stored in any order (for example):
• Net quantity
• Gross weight
• Average piece weight
• Average piece weight, higher resolution
• Counting accuracy
1. Press Info .
The first value is displayed.
2. Press Info again.
The next value is displayed.
3. Repeat as often as necessary until the weight display appears again.
Note If Info is not pressed again within 5 seconds , the scale automatically changes to the
weight display, even if all information has not yet been queried.
2.11 Switching scales
If a second scale or a weighing platform is connected, e. g. via the optional analog
second scale interface, the currently active scale is shown in the display.
The second scale can be operated in exactly the same way as the first scale.
Press Scale Select .
The display changes from one scale to the other.