Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 12)

Ranger RP
12
Operation
2 Operation
2.1 Switching on and off
Switching on Press ON/OFF.
The scale conducts a display test. When the weight display appears, the scale is
ready to weigh.
Switching off Press ON/OFF .
Before the display goes out, -OFF- appears briefly.
2.2 Zeroing / Zero point correction
Zeroing corrects the influence of slight changes on the load plate.
Manual 1. Unload scale.
2. Press
ZERO .
The zero display appears.
Automatic In the case of scales that cannot be certified, the automatic zero point correction can
be deactivated in the menu or the amount can be changed.
As standard, the zero point of the scale is automatically corrected when the scale is
unloaded.
2.3 Simple weighing
1. Place weighing sample on scale.
2. Wait until the stability monitor goes out.
3. Read weighing result.