Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 27)

Counting Ranger RP
27
3.9.4 Clearing saved target quantities
1. Enter the number of the memory location with the target quantity to be cleared (fac-
tory setting: 91 ... 100) and press Mem briefly.
The saved target quantity with tolerances is displayed.
2. Press C within 2 seconds.
CLEArED briefly appears in the display. The saved target quantity is cleared.
3.10 Counting with two scales
For piece counting, it is possible to connect a second scale or weighing platform, e. g.
a floor scale for counting a large number of pieces via the optional analog second
scale interface.
The necessary settings for the application and interface parameters are described in
the Sections 4.4.1, 4.6.1 and 4.6.4.
3.10.1 Counting with a reference scale
Prerequisite
The connected second scale is configured as reference scale.
1. Place the reference parts on the reference
scale and press Sample 10 or Sample
Size.
The scale determines the average piece weight and changes to the display in
pieces (PCS).
2. Place the parts to be counted on the first scale.
The total quantity is displayed.
Note • If tOtAL-Ct -> bULK is set in the menu, only the number of pieces on the bulk
scale is displayed.
• If tOtAL-Ct -> bOtH is set in the menu, the reference quantity is added to the
bulk quantity.