Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 41)

Settings in the menu Ranger RP
41
4.5 Terminal settings (TERMINAL)
4.5.1 DEVICE – Sleep mode, energy-saving mode and display backlighting
4.5.2 ACCESS – password for Supervisor menu access
SLEEP This menu item only appears on devices in mains operation.
When SLEEP is activated, the scale switches off display and backlighting after the
time period set when not in use. The display and backlighting are switched on again
at the press of a key or if the weight changes.
Possible settings: OFF, 1 min, 3 min, 5 min
PWr OFF This menu item only appears on devices in battery operation.
When PWr OFF is activated, the device switches itself off automatically after
approx. 3 minutes when not in use.
b.LIGHt Switching the display backlighting on/off.
On scales with a battery, the background lighting switches itself off automatically if
there has been no activity on the scale for 5 seconds.
DAtE.tim Setting date and time
DAtE.FOr • Select type of date setting: EU or US
DAtE • Enter the date in the selected format
tIME • Enter the time
AM.PM • Select AM/PM
bEEP Switching beep on/off
ON Switching on beep on each key press
OFF Switching off beep on each key press
Note This menu item is accessible without a Supervisor password.
SUPErVI Password entry for Supervisor menu access
ENtER.C Request to enter password
Enter the password and confirm with Yes
rEtYPE.C Request to repeat the password entry
Enter the password again and confirm with Yes
Notes • The password can consist of up to 4 characters.
• The key Yes must not be part of the password. It is required for confirming the
password.
• The key No may only be used in combination with another key.
• If you enter an impermissible code or make a typing error in the repetition,
COdE.Err. appears in the display.