Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 51)

Interface description Ranger RP
51
LEVEL 2 C2 Calibrate with the external calibration weight
C3 Calibrate with the internal calibration weight
I10 Inquire or set scale ID
DAT Inquire or set current date
I11 Inquiry of scale type
P100 Print out on the printer
P101 Print out stable weight value
P102 Print out current weight value immediately
PWR Power On/Off
SIRU Send weight value in the current unit immediately and repeat
SIU Send weight value in the current unit immediately
SNR Send stable weight value and repeat after every weight change
SNRU Send stable weight value in the current unit and repeat after every weight change
SRU Send weight value in the current unit and repeat
ST After pressing the Transfer key, send the stable weight value
SU Send stable weight value in the current unit
TIM Inquire or set the time
TST2 Start test function with external weight
TST3 Start test function with internal weight
LEVEL 3 I12 ID1
I13 ID2
PW Average piece weight
LEVEL SPECIAL CLR Clear
DS Short beep
I31 Header for the printout
ICP Send configuration of the printout
LST Send menu settings
M01 Weighing mode
M02 Stability setting
M03 Autozero function
M19 Send calibration weight
M21 Inquire/set weight unit
P Print text
P130 Weight value, unit and price
PCS Number of pieces
Command Meaning