Ohaus RANGER ADVANCED COMPACT COUNTING SCALES Manual en - Manual (Page 44)

Ranger RP
44
Settings in the menu
diGitAL Configuration of the digital inputs/outputs
IN 1 ... 4 Configuring inputs 1 ... 4
OFF • Input not assigned
ZErO • ZERO Key
tArE • TARE Key
PriNt • PRINT Key
CLEAr • C Key
rEF 10 • Sample 10 Key
rEF n • Sample Size Key
SCALE • Scale Select Key
inFO • Info Key
UNIt • Count Weight Key
totAL+ • +/- Key, short press of key
totAL- • +/- Key, long press of key
OUT 1 ... 4 • Configuring outputs 1 ... 4
OFF • Output not assigned
StAbLE • Stable weight value
bEL.MIN • Minimum weight not reached
AbV.MIN • Minimum weight reached or exceeded
bEL.tOL • Tolerance not reached
AbV.tOL • Tolerance exceeded
GOOd • Weight within the tolerance
UNdErLd • Insufficient load
OVErLd • Overload
StAr • Changed/calculated value
ANALOG Configuration of the analog second scale interface
Mode Operating mode of the second scale
rEF • Second scale can only be used to determine the average piece weight
bULK • Second scale can only be used as bulk scale
AuXILIA • No difference between reference and bulk scale, all functions available on the
scale selected
BYPASS • Second scale interface not assigned