M&C TechGroup SP2020-H_C_I_BB_F Operator's manual - Manual (Page 7)

7
Gas sampling and gas conditioning technology 2-1.1.6.1-ME
6 INTRODUCTION
M&C gas sample probes provide direct insitu ultra-fine filtration during continuous gas sampling for
analytic measurements. In this way, part of the necessary maintenance work for a system is concen-
trated on a single point. This filter technology has the major advantage that dust mixtures consisting of
ultra-fine and coarse dusts can be optimally retained with the least possible maintenance work.
Optimal adaptation of the sample probe to processing conditions and to measurement work is a nec-
essary condition for a measurement system to work smoothly. Basically, the gas sample should be
kept to a necessary minimum. This is made possible thanks to optimised downstream gas processing
using M&C components. Only in this way is it possible to reduce maintenance to a minimum while
ensuring maximum availability.
6.1 SERIAL NUMBERS
The nameplates bearing the serial number are located on the side of the electrical connection box.
N O T E !
Always quote the device's serial number when making enquiries and order-
ing replacement parts.