M&C TechGroup SP2020-H_C_I_BB_F Operator's manual - Manual (Page 21)

21
Gas sampling and gas conditioning technology 2-1.1.6.1-ME
17 SPARE PARTS LIST
Wear, tear and replacement part requirements depend on specific operating conditions.
The recommended quantities are based on experience and they are not binding.
Gas sample probe SP2020-H..
(C) Consumable parts
(R) Recommended spare parts
(S) Spare parts
Recommended quantity being in
operation [years]
Part No. Indication C/R/S 1 2 3
90 S 0020 Filter element S-2K150, ceramic, 2 µm, 150 mm C 6 12 18
90 F 0125 Filter element F-0,1GF150, glass fiber, 0,1 µm, 150 mm C 6 12 18
93 S 0045 Gasket (30) for filter element. Material: Viton. R 4 8 12
93 S 0051 Adaptor for probe filter element F-0,1GF. Material: PTFE R 4 8 12
93 S 0020 O-ring (39) for lid. Material : Viton R 2 4 8
93 S 0025 O-Ring (55) for lid. Material : Viton R 2 4 8
93 S 0035
Sealing spiral o-ring (39) for lid SP2000/7aT Material :
PTFE
R 1 2 3
93 S 0040
Sealing spiral o-ring (55) for lid SP2000/7aT Material :
PTFE
R 1 2 3
90 S 2080
Gasket 3/4" (blue), max. 600°C for sample tube. Material
Novapress
R 1 2 3
90 S 2077 Flange gasket DN65PN6 (67mm i.) Material : Novapress R 1 1 1
90 S 2075
Flange gasket set DN65 PN6 B, consisting of gasket (67)
and a set of screws 12x60.
S 1 1 1
93 S 0010
Thermostat (0-180°C), with over-temperature limiter and
low-temperature alarm for probe series SP.
R - - 1
93 S 0015 Heating cartridge 230VAC/800W, length 160mm R - - 1
93 S 0017 Heating cartridge 115VAC/800W, length 160mm R - - 1
93 S 0059 PT100 sensor R - - 1
93 S 0060
Spare thermoelement Fe-CuNi with clamping ring and
screw
R - - 1
93 S 0061
Spare thermoelement Ni-CrNi with clamping ring and
screw
R - - 1