M&C TechGroup SP2600-H_C_I_BB_F_0,1GF190 Operator's manual - Manual (Page 7)

7
Gas sampling and gas conditioning technology 2-1.1.5.1-ME
6 INTRODUCTION
The M&C gas sample probes type SP2600-H.. are based on the patented probe SP2000-H and are
used for continuous gas sampling in processes with a high extent of dust, high temperature and/or
high gas moisture.
6.1 SERIAL NUMBER
The type plates are to be found where the electrical connection box is placed.
N O T E !
Please indicate the serial number of the equipment in case of any question
and when ordering spare parts.
7 APPLICATION
Due to its large filter surface and the possibility to back-purge the filter element, the probes SP2600-
H/C/I/BB/F.. achieve a high service life especially in cases where no pre-filter can be applied. For this
purpose, a back-purge valve and a pneumatic stop valve for the sample gas outlet is integrated in the
probe.
Version SP2600-H/C/I/BB/F/0,1GF is suitable for dusts with extremely fine particles up to 0,1 µm and
version SP2600-H/C/I/BB/F/1K190 can be very efficiently back-purged thanks to the double-ply filter
element and an external filter membrane of 1 µm porosity.