M&C TechGroup SP2600-H_C_I_BB_F_0,1GF190 Operator's manual - Manual (Page 19)

19
Gas sampling and gas conditioning technology 2-1.1.5.1-ME
N O T E !
Pay attention that after putting in the filter housing lid the strap bolt is
screwed down hand-tight in cold condition and that it is tightened again after
the operating temperature is reached.
17 SPARE PARTS LIST
Wear, tear and replacement part requirements depend on the specific operating conditions.
The following table shows an extract of the recommended spare parts for probe of type SP2600-H.. .
Recommended spare parts
Part-No. Description
90 S 0030 Spare filter element S-1K190, ceramic, 1µm, 190mm
90 S 0035 Spare filter element S-0,1GF190, glass fiber, 0,1µm, 190mm
93 S 1000 Spare O-ring (68), Viton

, for lid SP2600-H/C/I/BB/F..
93 S 1005 Spare O-ring (86), Viton

, for lid SP2600-H/C/I/BB/F..
93 S 1010 Spare O-ring (105), Viton

, for lid SP2600-H/C/I/BB/F..
90 S 2077 Flange sealing DN65 PN6B (67), for SP2000, SP2600-H/C/I/BB/F..
93 S 0010 Spare thermostat 0-180°C
93 S 0015 Spare heating cartridge HLP, 230V 800W
93 S 0017 Spare heating cartridge HLP, 115V 800W
93 S 0018 Heat conducting paste for putting in the heating cartridge
93 S 2126 Clamp clip LK145 for SP2500/2600
90 S 0050 PTFE adapter for filter element S-0,1GF190
93 S 0059 Spare PT100 SP2000-H, SP2600-H
93 S 0044 Flange sealing (50) for filter element S-1K190, FPM
18 ANNEX
Additional product information may be seen and downloaded under:
www.mc-techgroup.com