M&C TechGroup SP3200 Operator's manual User Manual
Page 4

4
Gas sampling and gas conditioning technology
2-1.3.9-ME
3
INFORMATION ON THE USE IN HAZARDOUS AREAS
Please see the identification of the individual variants in table 4.
Detailed information and a copy of the declaration of conformity are contained in the ap-
pendix to these operating instructions. The devices must be installed and used in accord-
ance with the conditions and installation instructions given in the EX-Certificate (see ap-
pendix). Only then, a safe operation in hazardous areas is guaranteed.
Any changes to the standard configuration with unspecified parts or parts not authorised
by M&C as well as repair or service work with unspecified parts leads to an immediate loss
of ex-certification.
- In case of any doubt, please contact directly M&C or your M&C franchise dealer.
4
GUARANTEE
In the event of a device failure, please contact M&C directly or your M&C franchise dealer.
The device is covered by a one-year warranty starting from the day of delivery according to our normal terms
and conditions of sale and assuming a technically correct use of the unit. Wearing parts are not covered by
the warranty. The warranty includes free repair at our factory or free replacement of the device which must
be sent to us carriage paid and correctly packed.
5
TERMS AND SIGNALS USED IN THIS MANUAL
QUALIFIED
PERSONNEL
The term QUALIFIED PERSONNEL denotes people who are familiar with the installation,
start-up, maintenance and operation of the product and have the necessary qualifica-
tion by training or instruction.
The warning and notice symbols mean important information on the product or spe-
cific parts of these operating instructions to which special attention should be paid.
This symbol emphasizes important information on the product or specific parts of
these operating instructions referring to use in hazardous areas.