M&C TechGroup SP3200 Operator's manual - Manual (Page 23)

2-1.3.9-ME Gas sampling and gas conditioning technology 23
16 SHUTDOWN
Before shutdown, i.e. switching off the heater, the probe should be flushed with a suitable inert gas to pre-
vent condensation of aggressive components of the process gas.
17 SPARE PARTS LIST
Wear, tear and replacement part requirements depend on specific operating conditions.
The recommended quantities are based on experience and they are not binding.
Gas sample probe SP3200 and SP3200V
(C) Consumable parts
(R) Recommended spare parts
(S) Spare parts
Recommended quantity being in opera-
tion [years]
Part No. Indication C/R/S 1 2 3
90 F 0126 Filter element F-3SS150, 1.4404, 3 μm, 150 mm C 6 12 18
90 S 0020 Filter element S-2K150, ceramic, 2 μm, 150 mm C 6 12 18
93 S 0055 Gasket (30) for filter element, material graphite R 4 8 12
93 S 0020 O-ring (39) for lid SP3200V, material FPM R 2 4 8
93 S 0025 O-ring (55) for lid SP3200V, material FPM R 2 4 8
93 S 0030 Gasket (69) for lid SP3200, material graphite R 2 4 8
90 S 2072 Gasket for sample tube, 3/4", material graphite R 1 2 3
90 S 2084 Flange seal DN65PN6 (67mm i.), material graphite R 1 1 1
18 ANNEX

Drawing SP3200 RS, HEX5-1.08

Drawing SP3200 RS, HEX5-1.08

EC – Declaration of conformity
Further product documentation can be found in the internet under: www.mc-techgroup.com