Starting time, Ending time, 18 how to modify the t/c in or the date of a clip – EVS IPDirector Version 4.4 - March 2008 Part 2 User's Manual User Manual
Page 78: 19 how to publish a clip, How to modify the t/c in or the date of a clip, How to publish a clip, 18 h, 19 h
IP Director Version 4.4 – User Manual – Part 2: Logging and Browsing
EVS Broadcast Equipment – March 2008
Issue 4.4.C
65
S
TARTING
T
IME
The starting time is the time when the transfer started.
E
NDING
T
IME
The ending time is the time when the transfer ended.
3.2.18 H
OW TO
M
ODIFY THE
T/C
IN OR THE
D
ATE OF A
C
LIP
The T/C and date corresponding to the IN point of a clip can be modified from the
clip contextual menu. This operation is very useful when re-ingesting a feed which
must then be associated to a log sheet, or simply because the A/V material
ingested corresponds to A/V material which was originally recorded at a different
T/C and date.
To modify the T/C IN or Date of a clip, proceed as follows:
1.
Right-click the clip in the Database Explorer.
2.
Select the Modify T/C IN or Date option from the contextual menu.
This opens the following window:
3.
Type the new Timecode IN with the format HH:MM:SS:CS in the IN field, if
requested.
4.
Select the new Date for the clip in the Date In drop-down list.
5.
Click the Save button to save the changes.
3.2.19 H
OW TO
P
UBLISH A
C
LIP
Publishing a clip means the clip will be visible by the members of the group(s) the
clip is published to.
To publish a clip to groups of users from the Database Explorer, proceed as
follows:
1.
Right-click the clip to be published in the Database Explorer.
2.
Select Publish from the contextual menu.
The Publish Clip window opens.