EVS IPDirector Version 4.4 - March 2008 Part 2 User's Manual - Manual (Page 65)

Issue 4.4.C IP Director Version 4.4 – User Manual – Part 2 – Logging and Browsing
EVS Broadcast Equipment – March 2008
52
The following table describes briefly the commands available from the contextual
menu:
Command Description
Cut Not relevant in the element list.
Copy Copies the clip to the clipboard. The clip can then be
pasted in a bin.
Paste Not relevant in the element list.
Send To Provides a list of possible destinations, in a submenu, to
which the selected clip can be sent.
Possible destinations, depending on the XNet network,
are:
• the default play-list or bin
• a destination target (any destination visible on the
TCP/IP network)
• an archive target (XFile archive process)
• a non-linear editing system (Clean Edit, Avid)
See also the sections 3.2.8, 3.2.9, 3.2.14, 3.2.13
Import a play-list … Not relevant in the element list.
Publish Opens the Publish Clip window from which the selected
clip can be published, i.e. made available, to selected
groups of users.
See also the section 3.2.19.
Delete Deletes the selected clip from the XT Server.
View Key Clip Displays the Key clip associated with a Fill clip that is
selected. This option is only active on Fill clips that are
included in a Fill and Key association.
Delete Fill and Key
Link Deletes the link between the Fill and Key clips. This
option is only active on Fill clips that are included in a
Fill and Key association.
Edit Opens the Edit Clip window from which the user can
modify the clip information.
See also the section 3.2.6.
Modify T/C IN or
Date Opens the Modify T/C In or Date window from which the
user can modify the IN timecode or date of a clip.
See also the section 3.2.18.