3 how to add keywords specifically to a log entry, How to add keywords specifically to a log entry, Ow to – EVS IPDirector Version 4.4 - March 2008 Part 2 User's Manual User Manual
Page 33: Eywords, Pecifically to a, Ntry

Issue 4.4.C
IP Director Version 4.4 – User Manual – Part 2 – Logging and Browsing
EVS Broadcast Equipment – March 2008
20
Field Description
Comment
This feature makes the log entry just a comment
entered on the log. This type of log entry will be
displayed with a different colour in the log sheet.
1.6.3 H
OW TO
A
DD
K
EYWORDS
S
PECIFICALLY TO A
L
OG
E
NTRY
To add data to log entries effectively, it is best practice to add keywords using the
relevant keyword grids. These are usually best prepared in advance of the logging
session although they could be produced and/or modified at any time. As many
keyword grids as required can be used with a log.
You can add a keyword:
•
to a new log element from the Create a New Log window
•
to an existing log element from the Edit Log window
To add a keyword individually to a new or existing log element in a log sheet,
proceed as follows:
1.
The Create a New Log window or Edit Log window is opened in the IP
Logger.
2.
Select either Keywords > Keyword Grid or Keywords > Dictionary from
the Application bar.
3.
In the Create or Edit a New Log window, select the Keywords field:
The Keyword Grid or Dictionary is now active as the Apply button is
highlighted in orange.
4.
Select the keywords in the grid or dictionary.
The selected keywords are added to the log entry.
Note
In the Edit mode, selected from the Keyword Grid menu, a grid layout
type can be selected using the tab or defined using the selection. The
size of the window and its screen position can be determined using
normal windows techniques.