Garmin G1000 Quest Kodiak - Manual (Page 52)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-02 Rev. A
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
40
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
40 Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
The ANN TEST Softkey, when selected, causes an annunciation test tone to be played.
Selecting the SYNC DBS Softkey (label background changes to grey indicting the softkey is selected)
activates the Automatic Database Synchronization feature. When this feature is active, databases are
updated automatically in the MFD and both PFDs from one SD card. For a detailed discussion on database
synchronization, see the SD Card Use section in the Appendices.
AUX - UTILITY PAGE
For flight planning purposes, timers, trip statistics, and a scheduler feature are provided on the AUX -
Utility Page. The timers available include a stopwatch-like generic timer, a total time in flight timer, and a
record of the time of departure. Trip statistics—odometer, trip odometer, and average trip and maximum
groundspeeds—are displayed from the time of the last reset. Refer to the Additional Features section for a
dicussion on the Scheduler feature.
Figure 1-36 Utility Page
t
imers
The G1000 timers available include:
• Stopwatch-like generic timers (available from the PFD Timer/References Window and on the MFD AUX
- Utility Page)
• Total-time-in-flight timer (MFD AUX - Utility Page)
• Time since departure (MFD AUX - Utility Page)
The generic timer can be set to count up or down from a specified time (HH:MM:SS). When the
countdown on the timer reaches zero the digits begin to count up from zero. If the timer is reset before
reaching zero on a countdown, the digits are reset to the initial value. If the timer is counting up when
reset, the digits are zeroed.