Garmin G1000 Quest Kodiak - Manual (Page 190)

Garmin G1000 Pilot’s Guide for the Quest Kodiak 100 190-00590-02 Rev. A 178
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
USER WAYPOINTS
The G1000 can create and store up to 1,000 user-defined waypoints. User waypoints can be created from
any map page (except PFD Inset Map, AUX-Trip Planning Page, or Procedure Pages) by selecting a position on
the map using the Joystick, or from the User Waypoint Information Page by referencing a bearing/distance
from an existing waypoint or bearing from two existing waypoints. Once a waypoint has been created, it can
be renamed, deleted, or moved.
Figure 5-44 User Waypoint Information Page
Selected User
Waypoint
Navigation Map
Showing Selected
User Waypoint
User Waypoint List
- Identifier
- Comment
Softkeys
# User Wpts Used
GO BACK displayed if
User Wpt was created
on map page
User Wpt Comment
User Waypoint Info
- Identifier
- Temporary/Normal
- Waypoint Type
Reference Wpt/Info
- Identifier/Rad/Dist or
- Identifiers/Radials or
- Region/Lat/Long
Select a User Waypoint:
1) With the User Waypoint Information Page displayed, enter the name of the User Waypoint, or scroll to the
desired waypoint in the User Waypoint List using the large FMS Knob.
2) Press the ENT Key.
3) Press the FMS Knob to remove the flashing cursor.
Or :
1) With the Nearest User Waypoint Page displayed, press the FMS Knob
2) Press the ENT Key or turn either FMS Knob to select an identifier in the Nearest USR Box.
3) Press the FMS Knob to remove the flashing cursor.