Garmin G1000 Quest Kodiak - Manual (Page 29)

190-00590-02 Rev. A Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
17
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& cNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
SOFTkEY FUNCTION
The softkeys are located along the bottoms of the displays. The softkeys shown depend on the softkey level
or page being displayed. The bezel keys below the softkeys can be used to select the appropriate softkey. When
a softkey is selected, its color changes to black text on gray background and remains this way until it is turned
off, at which time it reverts to white text on black background.
Softkey Names (displayed)
Figure 1-14 Softkeys (Second-Level PFD Configuration)
Bezel-Mounted Softkeys (press)
Softkey On
PFD SOFTKEYS
The CDI, IDENT, TMR/REF, NRST, and ALERTS Softkeys undergo a momentary change to black text
on gray background and automatically switch back to white text on black background when selected. If
messages remain after acknowledgement, the ALERTS Softkey is black on white.
The PFD softkeys provide control over flight management functions, including GPS, NAV, terrain, traffic,
and lightning (optional). Each softkey sublevel has a BACK Softkey which can be pressed to return to
the previous level. The ALERTS Softkey is visible in all softkey levels. For the top level softkeys and the
transponder (XPDR) levels, the IDENT Softkey remains visible.
INSET Displays Inset Map in PFD lower left corner
OFF Removes Inset Map
DCLTR (3) Selects desired amount of map detail; cycles through declutter levels:
DCLTR (No Declutter): All map features visible
DCLTR-1: Declutters land data
DCLTR-2: Declutters land and SUA data
DCLTR-3: Removes everything except for the active flight plan
TRAFFIC Displays traffic information on Inset Map
TRAFFIC: No Traffic displayed on Inset Map
TRFC-1: Traffic displayed on Inset Map
TRFC-2: Traffic Only display shown
TOPO Displays topographical data (e.g., coastlines, terrain, rivers, lakes) and elevation scale
on Inset Map
TERRAIN Displays terrain information on Inset Map
STRMSCP Displays Stormscope information on Inset Map (optional)
NEXRAD Displays NEXRAD weather and coverage on Inset Map (optional)
XM LTNG Displays XM lightning information on Inset Map (optional)
SENSOR Displays softkeys for selecting the #1 and #2 AHRS and Air Data Computers
ADC1 Selects the #1 Air Data Computer
ADC2 Selects the #2 Air Data Computer