Garmin G1000 Quest Kodiak - Manual (Page 49)

190-00590-02 Rev. A Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
37
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& cNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
37 Garmin G1000 Pilot’s Guide for the Quest Kodiak 100
D
isPlay
U
nits
Units in which various quantities are displayed on the G1000 screens are listed on the System Setup Page.
The Navigation Angle reference, the Altitude/Vertical Speed, the Temperature, and the Position units can
be set from here.
Category Settings Affected Quantities Exceptions
Navigation Angle Magnetic (North)*
True (North)
User Heading
Course
Bearing
Track
Desired Track
Wind direction (Trip Planning Page)
Distance and Speed** Metric
Nautical*
Crosstrack error (HSI)
Bearing distances (information windows)
DME distance (information window)
Flight plan distances
Map ranges
DIS, GS, TAS, XTK fields (Navigation Status Box)
All distances on MFD
Altitude buffer distance (System Setup)
Arrival Alert trigger distance (System Setup)
All speeds on MFD Airspeed Indicator
True Airspeed (PFD)
Wind speed vector
Map range (Traffic Page, Terrain
Proximity/TAWS Page)
CDI scaling (System Setup)
Fuel range calculation (EIS)
Altitude and Vertical
Speed Feet*
Meters All altitudes on MFD
All elevations on MFD Altimeter
Vertical Speed Indicator
VNV altitudes (Active Flight Plan)
Temperature Celsius*
Fahrenheit All temperatures on PFD
Total Air Temperature (Trip Planning Page) Engine Indication System (EIS)
Fuel and Fuel Flow** Pounds*
Gallons Fuel parameters (Trip Planning Page) Engine Indication System (EIS)
Weight** Pounds*
Kilograms N/A N/A
Position HDDD°MM.MM’*
HDDD°MM’SS.S”
MGRS
UTM/UPS All positions N/A
* Default setting
** Contact a Garmin-authorized service center to change this setting
*** Not configurable
Table 1-1 Display Units Settings (System Setup Page)
Changing a display units setting:
1) Use the FMS Knob to select the System Setup Page.
2) Press the FMS Knob momentarily to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the desired field in the Display Units Box.