ACU-RITE VRO 300T - Manual (Page 54)

VRO 300T Setup
47
Parallel Port
Most printers connect to the parallel port. You can experiment with these
settings to format the printed output.
F
UNCTION —select OFF to disable the port or
PRINTER to enable it for printing.
O
UTPUT
T
AIL —enter the number of blank lines (CR
character), from 0 to 9, that you want to print
after the information is sent.
LF A
FTER
CR—press YES if you want to output a
line feed character after the carriage return (end
of line).
Protection
You have the ability to prevent changes to your
part programs and to your tool library without
first entering into the
INSTALLATION SETUP
and
disabling the protection.
With program protection set to
YES
, programs
cannot be changed or saved. This reduces the
likelihood that an inexperienced operator will
inadvertently make scrap parts by mistakenly
changing or deleting a program step.
If you protect the tool library, it can’t be mistakenly changed either.
PARALLEL PORT
PORT CONFIGURATION
FUNCTION
OUTPUT TAIL
PRINTER
0
LF AFTER CR NO
PROTECTION
PROGRAM
NO
TOOL LIBRARY
YES