ACU-RITE VRO 300T - Manual (Page 30)

VRO 300T Program Operations
23
Teaching a Position
To teach a position to the readout as you are making a part, select a step as
you normally would. In any field where a position is needed, instead of
entering numeric position values, machine to the position that you want to
enter, then use the
TEACH POSITION softkey to enter the position value. Only absolute
position values are used.
Example
The Position step below needs to have the Z1-axis entered.
Press the TEACH POSITION softkey and
the absolute position from the
Z1 display is automatically
placed in the Z1 field.