ACU-RITE VRO 300T - Manual (Page 47)

Setup VRO 300T
40
You will need a dial indicator and a measurement standard.
1.
Position the standard in the center of the segment.
2.
Enter one edge of the standard.
3.
Enter the other edge of the standard.
4.
Enter the actual size of the standard, including the probe
diameter if necessary.
5.
Press DONE to save the segment information into the table.
The readout will automatically set the segment boundaries between the
current segment and adjacent segments.
1.000
Same side
0.875
Opposite sides
If the calculated factor is 9999 or –9999, the machine
inaccuracy is too great and cannot be compensated.
SECOND POINT
FIRST POINT