Xilinx 1000BASE-X - Manual (Page 39)

Ethernet 1000BASE-X PCS/PMA or SGMII v9.1 www.xilinx.com 39
UG155 March 24, 2008
R
Chapter 3
Generating and Customizing the Core
The Ethernet 1000BASE-X PCS/PMA or SGMII core is generated using the CORE
Generator. This chapter describes the GUI options used to generate and customize the core.
GUI Interface
Figure 3-1 displays the Ethernet 1000BASE-X PCS/PMA or SGMII customization screen,
used to set core parameters and options. For help starting and using CORE Generator on
your system, see the documentation included with ISE™, including the CORE Generator
Guide, at
www.xilinx.com/support/software_manuals.htm .
Component Name
The component name is used as the base name of the output files generated for the core.
Names must begin with a letter and must be composed from the following characters: a
through z, 0 through 9 and “_.”
Figure 3-1: Core Customization Screen