ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 - Manual (Page 90)

ZyXEL G-560 User’s Guide
90 Chapter 7 Management Screens
7.5 F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
.bin extension, for example, "zyxel.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click SETTINGS > MANAGEMENT > F/W Upload to display the screen as shown.
Follow the instructions in this screen to upload firmware to your G-560.
Figure 61 Management: F/W Upload
The following table describes the labels in this screen.
Table 24 Management: F/W Upload
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to
find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two
minutes.
Note: Do not turn off the G-560 while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into
the G-560 again.