ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 - Manual (Page 89)

ZyXEL G-560 User’s Guide
Chapter 7 Management Screens 89
Figure 58 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default G-560 IP address (192.168.1.2).
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration File screen.
Figure 59 Configuration Upload Error
7.4.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the G-560 to its factory defaults as shown on the screen. The following warning screen
will appear.
Figure 60 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your G-
560. Refer to the section on resetting the G-560 for more information on the RESET button.