ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 - Manual (Page 51)

ZyXEL G-560 User’s Guide
Chapter 5 System Screens 51
Figure 25 System Settings
The following table describes the labels in this screen.
Table 7 System Settings
LABEL DESCRIPTION
Device Name This name can be up to 30 printable characters long. Spaces are allowed.
IP Address
Assignment
Obtain IP Address
Automatically
Select this option to have your G-560 use a dynamically assigned IP address from
a router each time.
Note: You must know the IP address assigned to the G-560 (by the
router) to access the G-560 again.
Use fixed IP
address
Select this option to have your G-560 use a static IP address. When you select this
option, fill in the fields below.
IP Address Enter the IP address of your G-560 in dotted decimal notation.
Note: If you change the G-560's IP address, you must use the new
IP address if you want to access the web configurator again.
Subnet Mask Enter the subnet mask.
Gateway IP
Address
Type the IP address of the gateway. The gateway is a router or switch on the same
network segment as the G-560. The gateway helps forward packets to their
destinations. Leave this field as 0.0.0.0 if you do not know it.
Apply Click Apply to save your changes back to the G-560.
Reset Click Reset to reload the previous configuration for this screen.