ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 - Manual (Page 85)

ZyXEL G-560 User’s Guide
Chapter 7 Management Screens 85
C
H A P T E R
7
Management Screens
This chapter describes the Maintenance screens.
7.1 Maintenance Overview
Use these maintenance screens to change the password, view logs, back up or restore the G-
560 configuration and change the web configurator language.
7.2 Configuring Password
To change your G-560's password (recommended), click SETTINGS > MANAGEMENT.
The screen appears as shown. This screen allows you to change the G-560's password.
If you forget your password (or the G-560 IP address), you will need to reset the G-560. See
the section on resetting the G-560 for details.
Figure 54 Management: Password
The following table describes the labels in this screen.
Table 21 Management: Password
LABEL DESCRIPTION
Current Password Type in your existing system password (1234 is the default password).
New Password Type your new system password (up to 30 printable characters). Spaces are not
allowed.
Note that as you type a password, the screen displays an asterisk (*) for each
character you type.