ZyXEL Communications 802.11g Wireless Access Point ZyXEL G-560 - Manual (Page 63)

ZyXEL G-560 User’s Guide
Chapter 6 Wireless Screens 63
Figure 35 Bridge Loop: Bridges on Different Wired LANs
To prevent bridge loops, do not set the G-560 to bridge mode while connected to both wired
and wireless segments of the same LAN. Also make sure that you do not have three or more
G-560s (in bridge mode and on different wired LANs) wirelessly connect to each other.
6.4.2.2 Configuring Access Point + Bridge Mode
Select Access Point + Bridge in the Operation Mode drop-down list box to display the
screen as shown next. In this screen, you can configure the G-560 to function as an AP and
bridge simultaneously.